- Multitech Mt9234mu Drivers
- Multitech Post Driver
- Multitech Driver
- Multitech Usb Modem Driver
- Multitech Mt5634zba Driver
For Mac OS X 10.4 through 10.8. Updated Mac install files for the MT9234MU, MT9234ZBA, MT9234ZBA-USB, MTCBA-C-x, MTCBA-E-x and MTCBA-G-x. File contains software that will install modem(s) into system. Windows prompts me to install drivers. Cancel any driver installation prompts. The MDK/UDK2 mounts as the MULTITECH drive without drivers. Drivers are only needed for the virtual USB COM port. Installation instructions and files are available on the ARM mbed site. Windows® Serial Drivers for the MTCBA Wireless and MT9234ZBA Family. Microsoft 64 bit serial drivers for Windows® Server 2008, 2012 and Windows® 7, 8 and 10. These drivers are not intended for USB MTCBA or USB MT9234ZBA products. If you can not find a driver for your operating system you can ask for it on our forum. Add MultiTech MT5634ZBA to your hardware list Windows XP, Windows 2000, Windows Server 2003, Windows 98, Windows ME, Windows NT, OpenServer 5.0.x, OpenUNIX 8.0.0, UnixWare 7.1.1, Windows 98 SE, Mac OS 8.x, Mac OS 9.x, Mac OS X, NetWare 4.2.
The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), USB, as well as Ethernet, and is available as a PCB and with Desktop housing.
The right product for you?
Migration card reader, provides path from legacy transponders to new technologies
Configurable remotely via contactless card and direct host communication
Can be customized at the factory and in the field using the ELATEC software tools
Migration card reader, provides path from legacy transponders to new technologies
Multitech Mt9234mu Drivers
Configurable remotely via contactless card and direct host communication
Can be customized at the factory and in the field using the ELATEC software tools
Available as PCB or housed device
Supports TWN4 MultiTech underlying technology
Three frequencies: 125/134.2 kHz, 13.56 MHz
Wireless programmable
Integrated antennas
USB, RS232, TTL serial (logical level 3.3 V, CMOS 5 V tolerant), I²C, Clock/Data, Wiegand
Two on-board SAM sockets (Secure Access Module)
CCID and PC/SC 2.01
4 GPIOs (General Purpose Input/Output)
Available as PCB or housed device
Supports TWN4 MultiTech underlying technology
Three frequencies: 125/134.2 kHz, 13.56 MHz
Wireless programmable
Integrated antennas
USB, RS232, TTL serial (logical level 3.3 V, CMOS 5 V tolerant), I²C, Clock/Data, Wiegand
Two on-board SAM sockets (Secure Access Module)
CCID and PC/SC 2.01
Multitech Post Driver
4 GPIOs (General Purpose Input/Output)
TWN4 MultiTech 2About the MultiTech 2 Family
The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), USB, as well as Ethernet, and is available as a PCB and with Desktop housing.
TWN4 MultiTech 2 is also compatible with over 60 of the most common RFID technologies currently being used around the world. Furthermore, in order to expand the realm of supported contactless identification methods, the all-in-one reader also supports NFC and optionally Bluetooth Low Energy. It is compatible with the two most commonly used smartphone operating systems - Android and iOS. Thus it can also be integrated in mobile identification applications.
In addition, TWN4 MultiTech 2 is flexibly programmable – when communicating with RFID transponders it can make automated decisions based on predefined rules. This type of configuration can easily be re-applied to other card readers by using a contactless configuration card, which considerably reduces installation times in large projects.
Multitech Driver
- TWN4 MultiTech 2 (Data Sheet) / Download
- TWN4 MultiTech 2 (EC Declaration of Conformityl) / Download
- Overview Supported Transponders / Download
Order Codes
Disclaimer
Multitech Usb Modem Driver
Multitech Mt5634zba Driver
|